IR Hot Drying Tunnel Machine for Screen Printing and Pad Printing Making Products Be High Flexibility and High Gloss

Introduction

The tunnel dryer does not have multiple heaters in the upper and lower sections of the tunnel body. A windshield is fixed on the front side of each skip to separate adjacent carts. The hot air passes vertically through the material layer and is reversed multiple times. The temperature of the hot air can be controlled in stages.

There is another type of through-flow drying equipment in which two tunnels are juxtaposed, and several drying sections are arranged along the longitudinal direction of the whole tunnel. An axial fan is installed in the upper part of each drying section of the two columns of tunnels, so that the hot air passes through the two columns in the section. At the same time, a material layer of the tunnel is input with a certain amount of outside air, and a certain amount of exhaust gas is discharged to perform partial exhaust gas recirculation.

Feature

1. The air energy heat pump dryer can effectively ensure the nutrients, health and environmental protection.
2. The temperature distribution in the drying process is uniform, the humidity can be automatically controlled, and the finished product is good in color.
3. Safe and reliable to use, can maintain high temperature work for a long time.

4. A wide range of applications, can dry a variety of materials, is a general drying equipment.

5. The drying process has low energy consumption and does not require a lot of manual monitoring, which effectively reduces operating costs.